Sec. 28.031. ISSUANCE OF PERMIT. (a) The commission may grant an application in whole or part and may issue the shaft permit if it finds:
(1) that the use or installation of the shaft is in the public interest and that after consideration of all siting alternatives there is a public need for construction of the shaft at the location for which the application is made;
(2) that no existing rights, including but not limited to mineral rights and water rights, will be impaired;
(3) that, with proper safeguards, both ground and surface water can be adequately protected from pollution; and
(4) that the applicant has made a satisfactory showing of financial responsibility if required by Subsection (b) of Section 28.053 of this chapter.
(b) In the permit the commission shall impose terms and conditions reasonably necessary to protect all water from pollution, including the necessary casing, liners, seals and surface facilities.
(c) In the permit the commission shall impose terms and conditions for final closure of surface facilities and plugging and sealing of the shaft reasonably necessary to protect all water penetrated from pollution.
Added by Acts 1983, 68th Leg., p. 651, ch. 148, Sec. 1, eff. May 18, 1983.
Structure Texas Statutes
Title 2 - Water Administration
Subtitle D - Water Quality Control
Chapter 28 - Water Wells and Drilled or Mined Shafts
Subchapter C. Drilled or Mined Shafts
Section 28.021. Permit From Commission
Section 28.022. Application for Permit
Section 28.023. Information Required of Applicant
Section 28.024. Application Fee
Section 28.025. Letter From Railroad Commission
Section 28.026. Inspection of Shaft Location
Section 28.027. Recommendations From Other Agencies
Section 28.028. Hearing on Permit Application
Section 28.029. Delegation of Hearing Powers
Section 28.031. Issuance of Permit
Section 28.032. Copies of Permit; Filing Requirements
Section 28.033. Record of Strata
Section 28.034. Geophysical and Drilling Log
Section 28.035. Seismic Reflection Survey
Section 28.036. Casing, Liner, and Seal Requirements
Section 28.037. Factors in Setting Casing, Liner, and Seal Requirements