Texas Statutes
Subchapter E. Drugs and Devices
Section 431.111. Adulterated Drug or Device

Sec. 431.111. ADULTERATED DRUG OR DEVICE. A drug or device shall be deemed to be adulterated:
(a)(1) if it consists in whole or in part of any filthy, putrid, or decomposed substance; or
(2)(A) if it has been prepared, packed, or held under insanitary conditions whereby it may have been contaminated with filth, or whereby it may have been rendered injurious to health; or
(B) if it is a drug and the methods used in, or the facilities or controls used for, its manufacture, processing, packing, or holding do not conform to or are not operated or administered in conformity with current good manufacturing practice to assure that such drug meets the requirements of this chapter as to safety and has the identity and strength, and meets the quality and purity characteristics, which it purports or is represented to possess; or
(3) if its container is composed, in whole or in part, of any poisonous or deleterious substance which may render the contents injurious to health; or
(4) if it:
(A) bears or contains, for purposes of coloring only, a color additive that is unsafe under Section 431.161(a); or
(B) is a color additive, the intended use of which in or on drugs or devices is for purposes of coloring only, and is unsafe under Section 431.161(a); or
(5) if it is a new animal drug that is unsafe under Section 512 of the federal Act;
(b) if it purports to be or is represented as a drug, the name of which is recognized in an official compendium, and its strength differs from, or its quality or purity falls below, the standards set forth in such compendium. Such determination as to strength, quality or purity shall be made in accordance with the tests or methods of assay set forth in such compendium, or in the absence of or inadequacy of such tests or methods of assay, those prescribed under the authority of the federal Act. No drug defined in an official compendium shall be deemed to be adulterated under this subsection because it differs from the standards of strength, quality, or purity therefor set forth in such compendium, if its difference in strength, quality, or purity from such standards is plainly stated on its label. Whenever a drug is recognized in The United States Pharmacopeia and The National Formulary (USP-NF), it shall be subject to the requirements of the USP-NF;
(c) if it is not subject to Subsection (b) and its strength differs from, or its purity or quality falls below, that which it purports or is represented to possess;
(d) if it is a drug and any substance has been:
(1) mixed or packed therewith so as to reduce its quality or strength; or
(2) substituted wholly or in part therefor;
(e) if it is, or purports to be or is represented as, a device that is subject to a performance standard established under Section 514 of the federal Act, unless the device is in all respects in conformity with the standard;
(f)(1) if it is a class III device:
(A)(i) that is required by a regulation adopted under Section 515(b) of the federal Act to have an approval under that section of an application for premarket approval and that is not exempt from Section 515 as provided by Section 520(g) of the federal Act; and
(ii)(I) for which an application for premarket approval or a notice of completion of a product development protocol was not filed with the United States Food and Drug Administration by the 90th day after the date of adoption of the regulation; or
(II) for which that application was filed and approval was denied or withdrawn, for which that notice was filed and was declared incomplete, or for which approval of the device under the protocol was withdrawn;
(B) that was classified under Section 513(f) of the federal Act into class III, which under Section 515(a) of the federal Act is required to have in effect an approved application for premarket approval, that is not exempt from Section 515 as provided by Section 520(g) of the federal Act, and that does not have the application in effect; or
(C) that was classified under Section 520(l) of the federal Act into class III, which under that section is required to have in effect an approved application under Section 515 of the federal Act, and that does not have the application in effect, except that:
(2)(A) in the case of a device classified under Section 513(f) of the federal Act into class III and intended solely for investigational use, Subdivision (1)(B) does not apply to the device during the period ending on the 90th day after the date of adoption of the regulations prescribing the procedures and conditions required by Section 520(g)(2) of the federal Act; and
(B) in the case of a device subject to a regulation adopted under Section 515(b) of the federal Act, Subdivision (1) does not apply to the device during the period ending on whichever of the following dates occurs later:
(i) the last day of the 30-day calendar month beginning after the month in which the classification of the device into class III became effective under Section 513 of the federal Act; or
(ii) the 90th day after the date of adoption of the regulation;
(g) if it is a banned device;
(h) if it is a device and the methods used in, or the facilities or controls used for its manufacture, packing, storage, or installations are not in conformity with applicable requirements under Section 520(f)(1) of the federal Act or an applicable condition as prescribed by an order under Section 520(f)(2) of the federal Act; or
(i) if it is a device for which an exemption has been granted under Section 520(g) of the federal Act for investigational use and the person who was granted the exemption or any investigator who uses the device under the exemption fails to comply with a requirement prescribed by or under that section.
Acts 1989, 71st Leg., ch. 678, Sec. 1, eff. Sept. 1, 1989. Amended by Acts 1993, 73rd Leg., ch. 440, Sec. 2, eff. Sept. 1, 1993.
Amended by:
Acts 2015, 84th Leg., R.S., Ch. 1 (S.B. 219), Sec. 3.0968, eff. April 2, 2015.

Structure Texas Statutes