RCW 19.27A.060
Hot water heaters—Temperature regulation.
(1) "Hot water heater" means the primary source of hot water for a residence.
(2) The thermostat of a new water heater offered for sale or lease in this state for use in a residential unit, shall be preset by the manufacturer no higher than one hundred twenty degrees Fahrenheit (or forty-nine degrees Celsius) or the minimum setting on any water heater which cannot be set as low as that temperature. Water heating systems may utilize higher reservoir temperature if mixing valves are set or systems are designed to restrict the temperature of water to one hundred twenty degrees Fahrenheit.
(3) Upon occupancy of a new tenant in a residential unit leased or rented in this state, if hot water is supplied from an accessible, individual water heater, the water heater shall be set by the owner or agent at a temperature not higher than one hundred twenty degrees Fahrenheit (forty-nine degrees Celsius) or the minimum setting on any water heater which cannot be set as low as that temperature. Water heating systems may utilize higher reservoir temperature if mixing valves are set or systems are designed to restrict the temperature of water to one hundred twenty degrees Fahrenheit.
(4) Nothing in this section shall prohibit an owner of an owner-occupied residential unit or resident of a leased or rented residential unit from readjusting the temperature setting after occupancy. Any readjustment of the temperature setting by the resident relieves the owner or agent of an individual residential unit and the manufacturer of water heaters from liability for damages attributed to the readjustment by the resident.
(5) The utility providing energy for any water heater under this section shall at least annually, include in its billing a statement:
(a) Recommending that water heaters be set no higher than one hundred twenty degrees Fahrenheit or the minimum setting on a water heater which cannot be set as low as that temperature to prevent severe burns and reduce excessive energy consumption; and
(b) That the thermostat of an individual water heater furnished in a residential unit leased or rented in this state to new tenants shall be set no higher than one hundred twenty degrees Fahrenheit or the minimum setting on a water heater which cannot be set as low as that temperature pursuant to chapter 19.27 RCW.
(6) The manufacturer of a water heater under this section which is offered for sale or installed after July 24, 1983, shall have a tag attached to the thermostat access plate or immediately adjacent to exposed thermostats. The tag shall state that the thermostat settings above the preset temperature may cause severe burns and consume excessive energy.
(7) Nothing in this section requires or permits any inspections other than those otherwise required or permitted by law.
(8) This section does not apply to multiple-unit residences supplied by central water heater systems.
[ 1985 c 119 § 1; 1983 c 178 § 2. Formerly RCW 19.27.130.]
NOTES:
Findings—1983 c 178: "The legislature recognizes that unnecessarily hot tap or bath water creates an extreme risk of severe burns, especially among the elderly, children, and retarded persons. Annually, numerous persons suffer severe scald burns, some resulting in death, from tap or bath water which is inordinately hot. Excessive tap and bath water temperatures in residential usage is unnecessary for sanitary purposes. Regulation of the setting of water temperatures upon installation can virtually eliminate incidences of dangerous scalding. Further, the legislature finds that projected future shortages of energy in our state could be reduced or prevented by the efficient utilization of existing energy resources. Reducing the temperature settings on thermostats to one hundred twenty degrees Fahrenheit (or forty-nine degrees Celsius) would save energy that is now unnecessarily consumed, reduce homeowners' average utility costs, and promote home safety without any loss of comfort or health." [ 1983 c 178 § 1.]
Structure Revised Code of Washington
Title 19 - Business Regulations—Miscellaneous
Chapter 19.27A - Energy-Related Building Standards.
19.27A.015 - State energy code—Minimum and maximum energy code.
19.27A.025 - Nonresidential buildings—Minimum standards—Amendments.
19.27A.045 - Maintaining energy code for residential structures.
19.27A.050 - State building code council—Construction—Inclusion of successor agency.
19.27A.060 - Hot water heaters—Temperature regulation.
19.27A.090 - Portable oil-fueled heaters—Sales and use—Approval required.
19.27A.100 - Portable oil-fueled heaters—Requirements for approval.
19.27A.120 - Violations—Penalty.
19.27A.130 - Finding—2009 c 423.
19.27A.150 - Strategic plan—Development and implementation.
19.27A.170 - Utilities—Maintenance of records of energy consumption data—Disclosure.
19.27A.180 - Energy performance score—Implementation strategy—Development and recommendations.
19.27A.190 - Qualifying public agency duties—Energy benchmark—Performance rating—Reports.
19.27A.200 - State energy performance standard—Definitions.
19.27A.210 - State energy performance standard.
19.27A.230 - State energy performance standard—Limit on early adoption incentive payments.
19.27A.240 - State energy performance standard—Early adoption incentive payment administration.
19.27A.250 - State energy management and benchmarking requirement.