Iowa Code
Chapter 103A - STATE BUILDING CODE
Section 103A.10 - Effect and application.

103A.10 Effect and application.
1. The state building code shall, for the buildings and structures to which it is applicable, constitute a lawful local building code.
2. The state building code shall be applicable:
a. To all buildings and structures owned by the state or an agency of the state.
b. In each governmental subdivision where the governing body has enacted an ordinance accepting the application of the code.
c. To all newly constructed buildings and structures the construction of which is paid for in whole or in part with moneys appropriated by the state but which are not wholly owned by the state.
d. In each city with a population of more than fifteen thousand that has not adopted a local building code that is substantially in accord with standards developed by a nationally recognized building code organization. The city shall enforce the state building code, including the provisions in section 103A.19, subsection 2.
3. Provisions of the state building code relating to the manufacture and installation of factory-built structures shall apply throughout the state. A factory-built structure approved by the commissioner shall be deemed to comply with all building regulations applicable to its manufacture and installation and shall be exempt from any other state or local building regulations. Except with respect to manufactured homes, as defined in section 103A.51, subsection 4, a provision of this chapter relating to the manufacture or installation of factory-built structures shall not alter or supersede any provision of chapter 542B concerning the practice of professional engineering or chapter 544A concerning the practice of architecture.
4. Notwithstanding the provisions of section 103A.22, subsection 1:
a. Provisions of the state building code establishing thermal efficiency energy conservation standards shall be applicable to all construction in the state which will contain enclosed space that is heated or cooled. The commissioner shall provide appropriate exceptions for construction where the application of an energy conservation requirement adopted pursuant to this chapter would be impractical.
b. Provisions of the state building code establishing lighting efficiency standards shall be applicable to all construction in the state and to new and replacement lighting in existing buildings.
5. Notwithstanding any other provision of this chapter to the contrary, the energy conservation requirements adopted by the commissioner and approved by the council shall apply to all new construction commenced on or after July 1, 2008, and shall supersede and replace any minimum requirements for energy conservation adopted or enacted by the governmental subdivision prior to that date and applicable to such construction.
[C73, 75, 77, 79, 81, §103A.10]
89 Acts, ch 39, §1; 2002 Acts, ch 1082, §2; 2006 Acts, ch 1090, §16, 26; 2006 Acts, ch 1185, §71; 2007 Acts, ch 22, §32, 33; 2007 Acts, ch 97, §1, 3; 2008 Acts, ch 1059, §1; 2008 Acts, ch 1126, §9, 10, 33
Referred to in §103A.19, 103A.22, 331.361

Structure Iowa Code

Iowa Code

Title III - PUBLIC SERVICES AND REGULATION

Chapter 103A - STATE BUILDING CODE

Section 103A.1 - Establishment.

Section 103A.2 - Statement of policy.

Section 103A.3 - Definitions.

Section 103A.4 - Building code commissioner.

Section 103A.5 - Commissioner — duties.

Section 103A.6 - Merit system.

Section 103A.7 - State building code.

Section 103A.8 - Standards.

Section 103A.8A - Energy conservation requirements.

Section 103A.8B - Sustainable design or green building standards.

Section 103A.8C - Standards for safe rooms and storm shelters.

Section 103A.9 - Factory-built structures.

Section 103A.10 - Effect and application.

Section 103A.10A - Plan reviews and inspections.

Section 103A.11 - Rules.

Section 103A.12 - Adoption and withdrawal — procedure.

Section 103A.13 - Alternate materials and methods of construction.

Section 103A.14 - Advisory council.

Section 103A.15 - Board of review.

Section 103A.16 - Board of review — appeal.

Section 103A.17 - Board of review — procedure.

Section 103A.18 - Court proceedings.

Section 103A.19 - Administration and enforcement.

Section 103A.20 - Permits — duty to issue.

Section 103A.21 - Penalty.

Section 103A.22 - Construction of statute.

Section 103A.23 - Fees.

Section 103A.25 - Prior resolutions.

Section 103A.26 - Manufactured or mobile home installers certification — violation — civil penalty.

Section 103A.27 - Commission on energy efficiency standards and practices.

Section 103A.30 - Approved tiedown system — provided at sale — installation.

Section 103A.31 - Installer compliance and certification.

Section 103A.32 - Compliance.

Section 103A.33 - Listing and form of certification of approved systems provided.

Section 103A.41 - State historic building code.

Section 103A.42 - Designation of qualified historic buildings and structures.

Section 103A.43 - Application of state historic building code as alternative.

Section 103A.45 - State historical society board — duties.

Section 103A.51 - Definitions.

Section 103A.52 - Manufactured or mobile home retailer license — procedure.

Section 103A.53 - License application and fees.

Section 103A.54 - Fees.

Section 103A.55 - Revocation, suspension, and denial of license.

Section 103A.56 - Rules.

Section 103A.57 - Unlawful practice — criminal penalty.

Section 103A.58 - Manufactured home, mobile home, or modular home retail installment contract — finance charge.

Section 103A.59 - Manufactured or mobile home installers certification — violation — civil penalty.

Section 103A.60 - Approved tiedown system — provided at sale — installation.

Section 103A.61 - Installer compliance and certification.

Section 103A.62 - Listing and form of certification of approved systems provided.

Section 103A.63 - Compliance.

Section 103A.71 - Residential contractors.