39-8615. INSPECTIONS AND TESTS. Conveyances shall have an inspection performed in accordance with ANSI/ASME standards set forth in section 39-8614, Idaho Code. The following types of inspections are required:
(1) Acceptance. The initial inspection and tests of new or altered equipment by a QEI to check for compliance with the applicable code requirements.
(2) Periodic. Periodic inspection and tests plus additional detailed examination and operation of equipment at specified intervals performed by a QEI to check for compliance with the applicable code requirements. Periodic inspections are required at least every five (5) years.
(3) Routine. Annual examinations performed in compliance with applicable codes to verify compliance with requirements.
History:
[39-8615, added 2004, ch. 359, sec. 1, p. 1072.]
Structure Idaho Code
Chapter 86 - IDAHO ELEVATOR SAFETY CODE ACT
Section 39-8601 - SHORT TITLE.
Section 39-8602 - LEGISLATIVE FINDINGS AND INTENT.
Section 39-8603 - DEFINITIONS.
Section 39-8604 - ENFORCEMENT.
Section 39-8605 - ADMINISTRATOR’S RULEMAKING AUTHORITY.
Section 39-8606 - SCOPE — EXEMPTIONS.
Section 39-8607 - INSPECTIONS.
Section 39-8609 - RESPONSIBILITY FOR OPERATION AND MAINTENANCE OF EQUIPMENT AND FOR PERIODIC TESTS.
Section 39-8610 - TEMPORARY CERTIFICATE TO OPERATE.
Section 39-8611 - CERTIFICATE TO OPERATE.
Section 39-8612 - OPERATION WITHOUT CERTIFICATE MAY BE ENJOINED.
Section 39-8614 - ADOPTION OF CODES.
Section 39-8615 - INSPECTIONS AND TESTS.
Section 39-8617 - ANNUAL RENEWAL.
Section 39-8618 - INSPECTION REPORTS AND COMPLIANCE AGREEMENTS.
Section 39-8619 - VIOLATIONS — MISDEMEANORS.
Section 39-8620 - CIVIL PENALTY FOR VIOLATION OF CHAPTER — NOTICE.