(a) No person shall operate or move any crawler-type tractor, steam shovel, derrick, roller or any equipment or structure having a normal operating speed of 10 or less miles per hour or a vertical body or load clearance of less than 1/2 inch per foot of the distance between any 2 adjacent axles or in any event of less than 9 inches, measured above the level surface of a roadway, upon or across any tracks at a railroad grade crossing without first complying with this section.
(b) Notice of any such intended crossing shall be given to a station agent of such railroad and a reasonable time be given to such railroad to provide proper protection at such crossing.
(c) Before making any such crossing the person operating or moving any such vehicle or equipment shall first stop the same not less than 15 feet nor more than 50 feet from the nearest rail of such railroad and while so stopped shall listen and look in both directions along such track for any approaching train and for signals indicating the approach of a train and shall not proceed until the crossing can be made safely.
(d) No such crossing shall be made when warning is given by automatic signal or crossing gates or a flagger or otherwise of the immediate approach of a railroad train or car. If a flagger is provided by the railroad, movement over the crossing shall be under the flagger's direction.
Structure Delaware Code
Subchapter VII. Special Stops Required
§ 4163. Certain vehicles must stop at all railroad grade crossings.
§ 4163A. Railroad crossing violations for operators of commercial vehicles only.
§ 4164. Stop signs and yield signs.
§ 4165. Emerging from alley, driveway, private road or building.
§ 4166. Overtaking and passing school bus; stop signal devices.